The skirting runs around the room for metres, but the eye often goes straight to the few centimetres where it meets a door frame. That corner is a good place to start choosing the trim. Bring a sample of the proposed skirting to a real frame and put it where it will finish.
Look along the wall
Face the door, then stand to one side and look along the skirting line. You may find that its upper moulding projects beyond the casing. Ask the carpenter to show the intended end detail on an offcut. A plain square edge, a different casing or a plinth block produce quite different results. Pick the one that belongs in this room.
Follow the paint break
Try the wall and trim colours together at the junction. If the room has painted doors, decide where each colour starts when the door is open. A phone photograph of the view from either side makes a good place to mark the line. Include a cupboard door or a second entrance if its detail differs.
Save the approved corner
Label the sample with its profile, dimensions and selected finish. Put it where the person ordering lengths and the person fitting them can both find it. Before buying the full quantity, look at the shortest wall return near the frame. A broad decorative profile can lose its shape over a very short run, even when it looks balanced on the long wall.
Ahmarra illustrates how a plinth block makes a separate junction between the vertical door architrave and the horizontal skirting. [1]
