Walk into the finished room as you would on an ordinary day. Close the door, switch on the usual lamp and open the cupboard you expect to use most. Give yourself a few minutes to notice what matters before zooming in on every surface with the phone.
Use a repeatable route
Start at the entrance and work clockwise. At each wall, look at the broad finish and then its junctions with the floor, frame and furniture. Compare them with the approved samples and the agreed scope. Use the lighting and viewing conditions agreed for the job when discussing a finish with the installer.
Record one clear item at a time
Instead of “paint by the door,” write “hall side of the door, lower hinge side, small patch of unpainted trim.” Take one photo that places it in the room and another close enough to show the issue. Add the person responsible and the agreed next step. If an item is simply a question, mark it as one until the installer has seen it.
Keep what you will need later
Collect paint names and sheens, flooring references, spare tiles and care instructions. Ask when the completed surfaces can first be washed and which products suit them. Store these details with the final room sketch. A year from now, the most valuable line may be the exact finish of the cupboard door that needs touching up.
NHBC’s walkthrough checklist covers opening doors, floor finishes and the condition of grout, giving concrete examples of what can be checked in one visit. [1]
