Mark the two edges
At the open end of the kitchen run, mark where the worktop stops and where the last wall cabinet stops. Transfer both positions to a piece of card held against the wall. View the lines from the doorway and the table. The eye often follows the cabinet down from above, while someone standing at the worktop notices the lower edge first.
Put a tile on the line
Hold up the actual tile and the proposed edge trim. On a patterned tile, move the layout half a tile in either direction to see what survives at the exposed edge. If the tile has a rounded or glazed factory edge, check that the sample you're admiring can actually be ordered in the orientation you drew.
Give the installer one clear corner
Take a square-on picture of the agreed arrangement and draw the chosen line on it. Include the underside of the cabinet and the end of the worktop in the frame. Write down whether the dimension refers to the outside of the trim or the face of the last tile. That small distinction is easy to lose once the tape comes off.
Schluter explains why the exposed tile edge needs a finish and how tile thickness affects the choice of trim height. [1]
